Abstract:今天的香港特区，拥有完善和强劲的世界范围的海、空交通运输系统及信息联系，是贸易及外汇的自由港；她采用简单的低税制及国际称誉的法制，而成为充满活力的国际贸易、投资及金融中心之一，还是旅游、购物胜地和闻名世界的国际大都会。称之为“东方之珠”是绝不为过的。

Abstract:This paper analyzes the deformation mechanism of CFG pile composite ground under road embankment. Based on the assumed settlement model and the distribution of friction of pile, a method for settlement calculation of the interaction of pile-soil-cushion is deduced. A trial case shows that the predictions given by the derived formulas agree well with field measurements.

Abstract:Extensive excavating area and deep support were employed in the foundation pit of Jiangsu International Library Center. The paper introduces the project, construction technique, settlement displacement survey and safety methods in detail.

Abstract:In this paper, the application of compaction grouting in Anqing power plant, which is aiming at eliminating the liquefaction probability of ground and increasing the ground capacity, is introduced. From the analysis of the experiment data, compaction grouting can meet with the requirements of the design. It is proved that compaction grouting is a useful method to treat liquefiable ground, which is especially true when the ground is narrow.

Abstract:The paper introduces Hua'nan Highway engineering in Guangzhou city. The project includes several bridges, in which totally 112 pieces drill (wash) bored piles, with 1.0 m, 1.5 m and 1.8 m in diameter, 44 ~ 51 m in length, were adopted as the foundations. Because geological conditions varies largely, some strata contain mud layer and Karst cave etc. and what’s more, main bridge locating in water at the depth of 8 m, some difficulties were dealt with.

Abstract:The roles of drilling technicians in geological engineering exploration are briefly stated. Beside of devotion to drilling field, the technicians also take part in the budget for geological engineering exploration, geological survey, plotting, report compiling, proposing combination of engineering drilling and engineering geology, and enhancing degree of exploration accuracy.

Abstract:介绍了施工现场各种材料的取样及检验的数理统计学原理，现场材料检验的取样方法，并以水泥、骨料、钢筋为例加以说明。

Abstract:通过石家庄第二造纸厂办公楼工程成功采用复合载体夯扩桩基础形式的实例，介绍了复合载体夯扩桩的作用机理、施工特点以及设计、施工中应注意的问题。

Abstract:针对富含水的砂卵砾石地层钻进困难、效率低和容易坍孔的特点，提出以潜孔锤钻进为基础，二次套管风力扫孔后下入注浆管进行注浆的施工工艺。探索了该地层浅孔条件下的一种简单、高效的成孔和注浆方法。

Abstract:西门子公司信息楼加层改造工程需要对原有的基础进行加固。通过对地质条件的调查，合理选用了静压桩的施工方法，解决了狭窄场地条件下的施工难题。介绍了其施工工艺

Abstract:广西北海银滩(中区)污水管排管工程中一段污水管位于北海海滩上。该段工程的地层为松散的砂、砾石层，地下水位高，同时受海水侵蚀影响，无法采用传统开挖铺管工艺施工，非开挖定向钻铺管成为首选。主要介绍了在此情况下的定向钻铺管技术及泥浆工艺，分析和探讨了泥浆在此类地层的定向钻进施工中的重要作用。

Abstract:According to the structural features of Shigu Reservoir in Jiangshan of Zhejiang Province, geo-conditions in reservoir and causes of dangers, the technical measures and operating standards of eliminating and consolidating are worked out and have received ideal result. The paper introduces the whole process in detail.

Abstract:介绍了广州市花都区某劳动教养管理所及其周边地区环境地质灾害治理依据、措施及施工工艺。

Abstract:Mainly introduced the design theoretical basis, working principles, functional and structural features of variable output jointly adjusting mechanism. Offering a whole set of practical constant power output adjusting mechanism for hydraulic system which adopts pillar stopper pump and overflow valve.

Abstract:To meet the need of exploration in Tabamiao Area of Erdos , the bit type was selected by making use of the data from well observation and optimizing bit type and drilling parameters by site practice. In the application of new type of PDC bits, the number of bits used for a single well was reduced 3~4, well-completing period was shortened 3~5 days.

Abstract:The model of change speed box with straight-cylinder gears was made by CAXA and AutoCAD three-dimensional plotting. Maximum stress and strain of the gear are calculated by stress analysis with finite element. It shows that the result from ANSYS software analysis is quite close to the reality.

Abstract:The paper briefly introduces the design, main technical parameters, structural patterns and production trial of GXY-150 engineering drill.

Abstract:Drilling Tech. of Salty layer in Oil Field

Abstract:To solve the difficulties in hydrological well drilling in Karst mountain area, some new suitable methods and technology are put forward. Disposition of drilling system, assemblage of drilling tools, drilling technique in different formations, drilling technology and regulation parameters and main points of manipulation are stated as the reference for construction in the similar geology.

Abstract:Drilling technique of the No.1 Well of Gucheng, including the optimizing structure design of well body section and the drilling technique of approachingbalance and method of coring, are introduced in this paper. The application of these new techniques not only resolved the difficult drilling problems of deep well effectively, but also get better results.

Abstract:Main reason of uneven abrasion on the work layer of impregnated diamond bit is proved through theoretical analysis and application test. Adopting rectangle water mouth makes diamond cutting burden heavier along radius line from outside to inside and causes the rapid abrasion to works layer when diamonds in bit are distributed evenly and in the same quality.

Abstract:Based on the practice of cable support in Xiezhuang Coal Mine, analysis is made on the design of cable support, construction procedure and assemblage of tools, calculation on supporting effect, problems in construction field, loss and compensation to pre-stress and monitor on working quality to increase the reliability.

Abstract:结合工程实例，介绍了在中深孔爆破中，采用小孔径和合理的孔网参数，增加钻孔装药高度，可以降低不合格的大块率，发挥装运设备的高生产效率。