1/23/2025, 2:10:56 AM 星期四
Synthesis and evaluation of highly absorbent resin plugging agent for drilling in loose broken formation
Author:
Affiliation:

1.Henan No.4 Geological Survey Institute Co., Ltd., ZhengzhouHenan450001, China;2.Henan Provincial Engineering and Technology Research Centre for Small Diameter Drilling,ZhengzhouHenan450001, China;3.Faculty of Engineering, China University of Geosciences, WuhanHubei430074, China

Clc Number:

P634.4

  • Article
  • | |
  • Metrics
  • |
  • Reference [17]
  • |
  • Related [20]
  • | | |
  • Comments
    Abstract:

    There are many challenges in the process of geological drilling, among which the problem of leakage is particularly prominent, especially in fractured formations, which occurs more frequently. Therefore, it is of great practical significance to develop a drilling fluid system suitable for loose broken formation to maintain rapid drilling in broken formation. The inert material and formula suitable for plugging in the broken formation were determined by optimization experiments. Meanwhile, Super Absorbent Polymer (SAP) was prepared by aqueous solution polymerization, and the water absorption ratio was more than 100 times under the condition of 0~100℃. The non-permeable drilling fluid loss instrument was used to optimize the particle size and concentration of SAP, and 0.3% of 4~8 mesh SAP was the best choice. Finally,the formula of the drilling fluid system for plugging the broken formation was optimized: water+8%bentonite+0.1%xanthan gum+0.6%HV-CMC+2%walnut shell+1%mica sheet+2%specialty fiber+0.3%SAP of 4~8 mesh. The drilling fluid system can completely plug the sand filling bed of 10~20 mesh, the loss is 0 mL at 0.69MPa pressure, and has good rheological stability in the range of 0~60℃. The apparent viscosity is between 25~48mPa·s, the dynamic shear force is 6~18 Pa, the API filtration loss is 7~11mL, and the lubrication coefficient is 0.311. It shows a good application prospect in plugging loose broken strata.

    Reference
    [1] 孙建华,刘秀美,王志刚,等.地质钻探孔内复杂情况和孔内事故种类梳理分析[J].探矿工程(岩土钻掘工程),2017,44(1):4-9.SUN Jianhua, LIU Xiumei, WANG Zhigang, et al. Classification and analysis on complex cases and accidents in geological drilling holes[J]. Exploration Engineering (Rock Soil Drilling and Tunneling), 2017,44(1):4-9.
    [2] 姚宁平,王毅,姚亚峰,等.我国煤矿井下复杂地质条件下钻探技术与装备进展[J].煤田地质与勘探,2020,48(2):1-7.YAO Ningping, WANG Yi, YAO Yafeng, et al. Progress of drilling technologies and equipments for complicated geological conditions in underground coal mines in China[J]. Coal Geology Exploration, 2020,48(2):1-7.
    [3] 侯贺晟,王成善,张交东,等.松辽盆地大陆深部科学钻探地球科学研究进展[J].中国地质,2018,45(4):641-657.HOU Hesheng, WANG Chengshan, ZHANG Jiaodong, et al. Deep continental scientific drilling engineering in Songliao Basin: progress in earth science research[J]. Geology in China, 2018,45(4):641-657.
    [4] 彭博一,于培志.破碎带地层钻探化学凝胶护壁堵漏技术的研究与应用[J].钻探工程,2022,49(1):64-71.PENG Boyi, YU Peizhi. Research and application of chemical gel wall protection and plugging technology in fractured zone formation drilling[J]. Drilling Engineering, 2022,49(1):64-71.
    [5] 王方博.川西海相破碎地层防塌钻井液技术研究及应用[J].钻探工程,2021,48(9):54-63.WANG Fangbo. Application of anti-collapse drilling fluid technology in marine broken formation in western Sichuan[J]. Drilling Engineering, 2021,48(9):54-63.
    [6] 孙金声,白英睿,程荣超,等.裂缝性恶性井漏地层堵漏技术研究进展与展望[J].石油勘探与开发,2021,48(3):630-638.SUN Jinsheng, BAI Yingrui, CHENG Rongchao, et al. Research progress and prospect of plugging technologies for fractured formation with severe lost circulation[J]. Petroleum Exploration and Development, 2021,48(3):630-638.
    [7] 杨现禹,蔡记华,蒋国盛,等.钻井液水活度对页岩井壁稳定性影响的实验研究——以秀山龙马溪组页岩为例[J].钻探工程,2022,49(3):1-12.YANG Xianyu, CAI Jihua, JIANG Guosheng, et al. Experimental study on the effect of water activity of drilling fluid on shale wellbore stability—Taking Xiushan Longmaxi shale as an example[J]. Drilling Engineering, 2022,49(3):1-12.
    [8] 夏海英,周沙,兰林,等.GCY-X体膨型堵漏剂的研制与性能评价新方法[J].钻井液与完井液,2011,28(6):11-13.XIA Haiying, ZHOU Sha, LAN Lin, et al. Study on development and new evaluation method of swelling LCM GCY-X[J]. Drilling Fluid Completion Fluid, 2011,28(6):11-13.
    [9] 翟科军,范胜,方俊伟,等.吸水膨胀树脂复合堵漏剂的研发与性能评价[J].油田化学,2021,38(2):196-203.ZHAI Kejun, FAN Sheng, FANG Junwei, et al. Development and evaluation of composite plugging agent of water-absorbent swelling resin[J]. Oilfield Chemistry, 2021,38(2):196-203.
    [10] 欧阳传湘,刘骜烜.钻井液用耐温微球堵漏剂的研制及性能评价[J].科学技术与工程,2014,14(32):201-205.YANG ChuanxiangOU, LIU Aoxuan. Preparation and characterization of heat-resistant microsphere plugging agent used in drilling fluid[J]. Science Technology and Engineering, 2014,14(32):201-205.
    [11] 乌效鸣,蔡记华,胡郁乐.钻井液与岩土工程浆材[M].武汉:中国地质大学出版社,2014.WU Xiaoming, CAI Jihua, HU Yule. Drilling Fluid and Geotechnical Slurry Material[M]. Wuhan: China University of Geosciences Press, 2014.
    [12] 张洪利,郭艳,王志龙.国内钻井堵漏材料现状[J].特种油气藏,2004,11(2):1-2,10.ZHANG Hongli, GUO Yan, WANG Zhilong. Lost circulation materials in China[J]. Special Oil Gas Reservoirs, 2004,11(2):1-2,10.
    [13] 应春业,高元宏,段隆臣,等.新型吸水膨胀堵漏剂的研发与评价[J].钻井液与完井液,2017,34(4):38-44.YING Chunye, GAO Yuanhong, DUAN Longchen, et al. Development and evaluation of a new water swelling lost circulation material[J]. Drilling Fluid Completion Fluid, 2017,34(4):38-44.
    [14] 刘玲秀.可生物降解高吸水树脂的制备[D].青岛:青岛科技大学,2011.LIU Lingxiu. Synthesis of biodegradable super absorbents[D]. Qingdao: Qingdao University of Science and Technology, 2011.
    [15] 刘金华,刘四海,龙大清,等.明1井交联成膜与化学固结承压堵漏技术[J].石油钻探技术,2017,45(2):54-60.LIU Jinhua, LIU Sihai, LONG Daqing, et al. Strengthening plugging operations by combining cross-linked film and chemical consolidation in Well Ming-1[J]. Petroleum Drilling Techniques, 2017,45(2):54-60.
    [16] 李新亮,段明,邓正强,等.含笼状纳米粒子复合降滤失剂的制备与性能[J].油田化学,2023,40(4):585-589.LI Xinliang, DUAN Ming, DENG Zhengqiang, et al. Preparation and performance evaluation of composite fluid loss reducer containing caged nanoparticles[J]. Oilfield Chemistry, 2023,40(4):585-589.
    [17] 王中华.抗钙钻井液降滤失剂P(AMPS-DEAM)聚合物的合成[J].精细与专用化学品,2010,18(4):24-28.WANG Zhonghua. Synthesis of the P(AMPS-DEAM)polymer used as loss additive for anti-calcium drilling fluid[J]. Fine and Specialty Chemicals, 2010,18(4):24-28.
    Cited by
    Comments
    Comments
    分享到微博
    Submit
Get Citation
Share
Article Metrics
  • Abstract:52
  • PDF: 994
  • HTML: 6
  • Cited by: 0
History
  • Received:July 17,2024
  • Revised:October 04,2024
  • Adopted:October 09,2024
  • Online: December 04,2024
  • Published: November 10,2024
Article QR Code