4/7/2025, 1:18:17 AM 星期一
Modal analysis and topology optimization of the mast of truck-mounted all-hydraulic rig
CSTR:
Author:
Affiliation:

1.Institute of Exploration Techniques, CAGS, Langfang Hebei 065000, China;2.Langfang Polytechnic Institute, Langfang Hebei 065000, China;3.China University of Geosciences, Beijing 100083, China

Clc Number:

P634.3

  • Article
  • | |
  • Metrics
  • |
  • Reference [17]
  • |
  • Related [20]
  • | | |
  • Comments
    Abstract:

    With the advantages of high automation, wide drilling adaptability, good mobility and high drilling efficiency, truck-mounted hydraulic drilling rig is widely used in coal bed methane extraction wells, water wells and so on. As an important component of the drilling rig, the mast supports the power head for rotary drilling. The vibrational stability of the mast has very important influence on the reliability of the drilling rig. Through modal analysis, the natural frequency and the modal amplitude of the mast are determined, and the results show that the resonant phenomenon may occur. Through the topological optimization analysis of the mast and according to the actual functions of the mast, the optimal model is obtained. The static structural analysis and the modal analysis results show that the optimization effect is remarkable, which meets the structural strength requirements and avoids the occurrence of resonance. The finite element analysis of the mast provides theoretical support for the structure design of the mast, and provides a modern mechanical structure design method.

    Reference
    [1] 黄印国.车载煤层气钻机设计及专用动力水龙头研究[D].长春:吉林大学,2014.HUANG Yinguo. Design of vehicle CBM drilling rigs and research on special power swivel[D]. Changchun: Jilin University, 2014.
    [2] 冯起赠,宋志彬,和国磊.SDC-1000车装全液压钻机在煤层气施工中的应用[J].探矿工程(岩土钻掘工程),2009,36(S1):65-67.FENG Qizeng, SONG Zhibin, HE Guolei. Application of SDC-1000 mobile hydraulic drilling rig in coalbed gas exploration[J]. Exploration Engineering (Rock & Soil Drilling and Tunneling), 2009,36(S1):65-67.
    [3] 冯起赠,秦如雷,许本冲,等.全液压车装钻机在集束式潜孔锤反井施工中的应用[J].探矿工程(岩土钻掘工程),2014,41(6):23-26.FENG Qizeng, QIN Rulei, XU Benchong, et al. Application of all hydraulic truck-mounted drilling rig in cluster DTH inverse well construction[J]. Exploration Engineering (Rock & Soil Drilling and Tunneling), 2014,41(6):23-26.
    [4] 曹东风.宝峨RB50型车载钻机施工工艺探讨[J].中国煤炭地质,2009,21(7):69-85.CAO Dongfeng. Probe into Bauer RB50 truck-mounted drilling rig operational techniques[J]. Coal Geology of China, 2009,21(7):69-85.
    [5] 王俊杰.浅析宝峨RB50车载钻机在水井开发中的应用[J].华北国土资源,2016(2):117-118.WANG Junjie. Brief analysis on the application of Bauer RB50 truck-mounted rig in water well development[J]. Huabei Land and Resources, 2016(2):117-118.
    [6] 高宏亮.车载钻机在地质勘探工程中的应用[J].地质装备,2009(4):37-40.GAO Hongliang. Application of truck-mounted rig in geological exploration engineering[J]. Equipemnt for Geotechnical Engineering, 2009(4):37-40.
    [7] 王思坦,杨义勇,李建华,等.基于ANSYS Workbench的岩心钻机桅杆模态分析方法[J].地质装备,2012,13(6):14-16.WANG Sitan, YANG Yiyong, LI Jianhua, et al. Modal analysis method of mast for core rig based on ANSYS workbench[J]. Equipment for Geotechnical Engineering, 2012,13(6):14-16.
    [8] 杜垚森,师敏,赵远,等.SDC-2500型煤层气车载钻机桅杆支架的模态分析[J].钻探工程,2022,49(2):51-57.DU Yaosen, SHI Min, ZHAO Yuan, et al. Modal analysis of the mast support frame of SDC-2500 coal bed methane truck-mounted rig[J]. Drilling Engineering, 2022,49(2):51-57.
    [9] 贺明辉.基于ANSYS的旋挖钻机桅杆疲劳分析[D].西安:西安建筑科技大学,2017.HE Minghui. Fatigue analysis for the mast of rotary drilling rig based on ANSYS[D]. Xi’an: Xi’an University of Architecture and Technology, 2017.
    [10] 王林军,王锬,杜义贤,等.基于ANSYS-Workbench的液压机机架模态分析及拓扑优化[J].煤矿机械,2019,40(3):79-83.WANG Linjun, WANG Tan, DU Yixian, et al. Modal analysis and topology optimization of hydraulic press rack based on ANSYS-Workbench[J]. Coal Mine Machinery, 2019,40(3):79-83.
    [11] 杜垚森,周琴,师敏,等.车装全液压钻机伸缩桅杆的结构强度分析[J].煤矿机械,2021,42(11):95-98.DU Yaosen, ZHOU Qin, SHI Min, et al. Structure strength analysis on telescopic mast of truck-mounted hydraulic rig[J]. Coal Mine Machinery, 2021,42(11):95-98.
    [12] 伍晓龙,刘凡柏.4000 m岩心钻机桅杆结构设计与有限元分析[J].钻探工程,2021,48(1):88-94.WU Xiaolong, LIU Fanbai. Structural design and finite element analysis of mast of 4000 meter core drilling rig[J]. Drilling Engineering, 2021,48(1):88-94.
    [13] Allaire G,Jouve F,Toader A M. A level-set method for shape optimization[J]. Comptes Rendus Mathematique, 2002,334(12):1125-1130.
    [14] Su R Y,Gui L G,Fan Z J. Topology and sizing optimization of truss structures using adaptive genetic algorithm with node matrix encoding[C]//Tianjin: 2009.
    [15] 李家春,胡捷,李宏涛,等.大型矿井提升机卷筒结构拓扑优化研究[J].煤炭技术,2017,36(3):231-234.LI Jiachun, HU Jie, LI Hongtao, et al. Research on topology optimization of large mine hoist drum structure[J]. Coal Technology, 2017,36(3):231-234.
    [16] 陈忠山,乔红兵,张浩,等.CMM2-20型液压钻车钻架静力学分析[J].煤炭技术,2021,40(2):176-179.CHEN Zhongshan, QIAO Hongbing, ZHANG Hao, et al. Static analysis of CMM2-20 type full hydraulic drilling rig[J]. Coal Technology, 2021,40(2):176-179.
    [17] 许翠华.煤层气车载钻机桅杆设计及分析[J].能源与环保,2017,30(12):84-87.XU Cuihua. Analysis and design on CBM mobile drilling rig’s mast[J]. China Energy and Environmental Protection, 2017,30(12):84-87.
    Cited by
Get Citation
Share
Article Metrics
  • Abstract:659
  • PDF: 1097
  • HTML: 1209
  • Cited by: 0
History
  • Received:February 23,2022
  • Revised:April 11,2022
  • Adopted:April 24,2022
  • Online: May 27,2022
  • Published: May 10,2022
Article QR Code