4/6/2025, 2:11:30 PM 星期日
Home > Archive>Volume 46, Issue 10, 2019 >87-93
PDF HTML XML Export Cite reminder
Numerical simulation analysis of rock blasting structure based on ANSYS/LS-DYNA
CSTR:
[cstr]
Author:
Affiliation:

1.Beijing Municipal Road and Bridge Co., Ltd.;2.School of Engineering and Technology, China University of Geosciences

Clc Number:

TD235

  • Article
    • | |
  • Metrics
    • |
  • Reference [24]
    • |
  • Related [20]
    • | | |
  • Comments
    Abstract:

    Plasma blasting technology is a new type of blasting technology. The design of blasting holes plays a decisive role in the overall blasting effect and blasting efficiency. In this paper, the finite element model is established for the blasting hole based on ANSYS/LS-DYNA. The numerical simulation of the wall pressure and the fracture zone of the undercut holes under blasting loads is carried out. The results show that the distortion energy changes during blasting from beginning to end. It is basically elliptical; and the smaller the aperture, the larger the accumulated energy, and the greater the damage to the rock mass; the shorter the hole depth, the smaller the energy accumulation space, and the greater the damage caused by the blasting to the rock mass; The hole depth has less impact on the lower rock mass and has greater impact on the middle rock mass. In addition, since the explosion experiment is mostly a destructive one, it is difficult to carry out the prototype test. Therefore, it is feasible to use the numerical simulation method to study the structure of the blasthole, which can be used as a reference for field work.

    Reference
    [1]刘柏禄,潘建忠,谢世勇.岩石破碎方法的研究现状及展望[J].中国钨业,2011,26(1):15-19.LIU Bailu, PAN Jianzhong, XIE Shiyong. On the research development of rock fragmentation and its prospect[J]. China Tungsten Industry, 2011,26(1):15-19.
    [2]邱爱慈，曾正中，张乔根，等.中国电气工程大典，第7篇，脉冲功率技术基础[M].北京：中国电力出版社，2009.QIU Aici, ZENG Zhengzhong, ZHANG Qiaogen, et al. Chinese electrical engineering canon, chapter 7, pulsed power technology foundation[M]. Beijing: China Electric Power Press, 2009.
    [3]王广旭.等离子放电破岩技术基础研究[D].青岛：中国石油大学(华东),2016.WANG Guangxu. Fundamental research on plasma discharge rock breaking technology[D]. Qingdao: China University of Petroleum, 2016.
    [4]熊代余,顾毅成.岩石爆破理论与技术新进展[M].北京：冶金工业出版社，2002.XIONG Daiyu, GU Yicheng. Advances in rock blasting theory and technology[M]. Beijing: Metallurgical Industry Press, 2002.
    [5]杨军,金乾坤，黄风雷.岩石爆破理论模型及数值计算[M].北京：科学出版社，1999.YANG Jun, JIN Qiankun, HUANG Fenglei. Theoretical model and numerical calculation of rock blasting[M]. Beijing: Science Press, 1999.
    [6]王继峰.岩石爆破技术的现状与发展[J].煤矿爆破,2005(3):25-28.WANG Jifeng. The present situation and development of rock blasting technology[J]. Coal Mine Blasting, 2005(3):25-28.
    [7]徐颖，孟益平，吴德义,等.爆破工程[M].武汉：武汉大学出版社，2014.XU Ying, MENG Yiping, WU Deyi, et alc. Blasting engineering[M]. Wuhan: Wuhan University Press, 2014.
    [8]张敢生，孙俊鹏,陈庆凯，等.工程爆破[M].沈阳：东北大学出版社，2013.ZHANG Gansheng, SUN Junpeng, CHEN Qingkai, et al. Blasting engineering[M]. Shenyang: Northeastern University Press, 2013.
    [9]庞旭卿,张碧.工程爆破[M].成都：西南交通大学出版社，2011.PANG Xuqing, ZHANG Bi. Blasting engineering[M]. Chengdu: Southwest Jiaotong University Press, 2011.
    [10]张红松，胡仁喜，康士廷，等.ANSYS14.5/LS-DYNA非线性有限元分析实例指导教程[M].北京：机械工业出版社，2013.ZHANG Hongsong, HU Renxi, KANG Shiting, et al. ANSYS14.5/LS-DYNA nonlinear finite element analysis tutorial[M]. Beijing: China Machine Press, 2013.
    [11]涂振飞. ANSYS有限元分析工程应用实例教程[M].北京：中国建筑工业出版社，2010.TU Zhenfei. ANSYS finite element analysis engineering application tutorial[M]. Beijing: China Architecture & Building Press, 2010.
    [12]LSTC，LS-DYNA KEYWORD USER’S MANUAL VOLUME I[EB/OL].(2007-5).
    [13]孙波勇.台阶爆破超钻深度影响因素的研究与数值模拟[D].武汉：武汉科技大学，2007.SUN Boyong. The study and numerical simulation of influence factors for sub-drilling of bench blasting[D]. Wuhan: Wuhan University of Science and Technology, 2007.
    [14]王庆国.隧道岩石爆破理论研究与数值模拟[D].成都：西南交通大学，2008.WANG Qingguo. Theory study and numerical simulation on rock blasting of tunne[D]. Chengdu: Southwest Jiaotong University, 2008.
    [15]彭静波.极硬岩条件下露天台阶深孔爆破质量改善研究[D].武汉：武汉工程大学，2015.PENG Jingbo. Study on improvement of open-pit benchs blasting quality under the conditions of extremely hard rock[D]. Wuhan: Wuhan Institute of Technology, 2015.
    [16]孙建刚，闫庆芳，周利剑.有限单元法及其应用[M].哈尔滨：哈尔滨地图出版社，2007.SUN Jiangang, YAN Qingfang, ZHOU Lijian. Finite element method and its application[M]. Harbin: Harbin Cartographic Publishing House, 2007.
    [17]张世琛.露天爆破LS-DYNA数值模拟分析[J].科技风，2016(2):99-100.ZHANG Shichen. LS-DYNA numerical simulation analysis of open-pit blasting[J]. Technology Wind, 2016(2): 99-100.
    [18]刘新波,盛建龙.爆破数学模型浅析[J].爆破,1999(3):102-106.LIU Xinbo, SHENG Jianlong. Simple analysis of blasting optimum mathematical model[J]. Blasting, 1999(3):102-106.
    [19]白金泽.LS-DYNA3D理论基础与实例分析[M].北京：科学出版社，2005.BAI Jinze. LS-DYNA3D theoretical basis and case analysis[M]. Beijing: Science Press, 2005.
    [20]石少卿，康建功，汪敏，等.ANSYS/LS-DYNA在爆炸与冲击领域内的工程应用[M].北京：中国建筑工业出版，2011.SHI Shaoqing, KANG Jiangong, WANG Min, et al. Engineering application of ANSYS/LS-DYNA in explosion and shock field[M]. Beijing: China Architecture & Building Press, 2011.
    [21]尚晓江，苏建宇，王化锋，等.ANSYS/LS-DYNA动力分析方法与工程实例[M].北京：中国水利水电出版社，2008.SHANG Xiaojiang, SU Jianyu, WANG Huafeng, et al. ANSYS/LS-DYNA dynamic analysis method and engineering example[M]. Beijing: China Water & Power Press, 2008.
    [22]张袁娟，黄金香，李梅.露天矿台阶爆破合理堵塞长度确定方法[J].煤矿安全，2014,45(11)：211-213,217.ZHANG Yuanjuan, HUANG Jinxiang, LI Mei. Identifying reasonable blast hole blockage length of bench blasting in open-pit mine[J]. Safety in Coal Mines, 2014,45(11):211-213,217.
    [23]赵海鸥.LS-DYNA动力分析指南[M].北京：兵器工业出版社,2003.ZHAO Haiou. LS-DYNA dynamic analysis guide[M]. Beijing: Ordnance Industry Press, 2003.
    [24]丁希平，王中黔，冯叔瑜.堵塞长度对台阶爆破作用影响的数值模拟[J].煤炭学报，2011,26(4)：370-373.DING Xiping, WANG Zhongqian, FENG Shuyu. Simulation on effect of stemming length to deep hole bench blasting[J]. Journal of China Coal Society, 2011,26(4)：370-373.
    Cited by
    Comments
    Comments
    分享到微博
    Submit
Get Citation

Copy
Share
Article Metrics
  • Abstract:1077
  • PDF: 1289
  • HTML: 279
  • Cited by: 0
History
  • Received:March 19,2019
  • Revised:March 22,2019
  • Adopted:July 30,2019
  • Online: November 06,2019
Article QR Code
Today's visits：1799 Total visits：155906   津ICP备19010518号-1  

津公网安备12011002024030号
Address：No.77 Jinguang District, Langfang City, Hebei Province Post Code：065000 Phone：0316-2096324
URL：http://www.tkgc.net/ E-mail：tkgc@mail.cgs.gov.cn
Drilling Engineering ® 2025 All Rights ReservedSupported by:Beijing E-Tiller Technology Development Co., Ltd.