4/5/2025, 10:34:02 PM 星期六
Field testing of rotary-percussive PDM in Linpan Oilfield
CSTR:
Author:
Affiliation:

Sinopec Research Institute of Petroleum Engineering

Clc Number:

P634.3;TE242

  • Article
  • | |
  • Metrics
  • |
  • Reference [7]
  • |
  • Related [20]
  • | | |
  • Comments
    Abstract:

    The structural principle and main performance parameters of the rotary-percussive PDM are elaborated in this paper. With the combination of impact rock crushing with shear rock cutting of the PDC bit, the tool can provide both the advantages of percussion drilling and PDM drilling, and improve the drill bit’s working performance, resulting in higher ROP. It can also reduce drag forces; thus increasing directional drilling efficiency. The tool impact force has a positive correlation with the weight on bit while the impact frequency is directly proportional to the motor rpm. Tests of the φ178mm drilling motors have been carried out in drilling vertical and directional wells in Linpan Oilfield respectively. ROP in compound drilling was improved by 22.1%~41.8% compared with that of the adjacent well, while the slide drilling ROP was increased by 51.1%, which is of positive significance for speeding up the oilfield exploration and development and reducing drilling cost consequently.

    Reference
    [1]李国华,鲍洪志,陶兴华.旋冲钻井参数对破岩效率的影响研究[J].石油钻探技术,2004,32(2):4-7.
    [2]陶兴华.液动射流式冲击器工作数学模型的建立[J].石油钻探技术,2005,33(1):44-47.
    [3]索忠伟,王甲昌,张海平,等.旋冲钻井在塔河工区超深井段的应用[J].石油钻采工艺,2013,35(4):45-46.
    [4]AG-Itator 水力振荡器及其在我国的试验应用[J]. 探矿工程(岩土钻掘工程),2015,42(7):54-57.
    [5]苏义脑.螺杆钻具的工作特性[J].石油钻采工艺,1998,20(6):11-15.
    [6]王先洲,蒋明,邓增库,等.苏76-1-20H井钻井技术[J].石油钻采工艺,2013,35(2):26-30.
    [7]马广军,王甲昌,张海平.螺杆驱动旋冲钻井工具设计及试验研究[J].石油钻探技术,2016,44(3):50-55.
    Cited by
Get Citation
Share
Article Metrics
  • Abstract:1005
  • PDF: 958
  • HTML: 237
  • Cited by: 0
History
  • Received:January 07,2019
  • Revised:September 23,2019
  • Adopted:December 02,2019
  • Online: December 31,2019
Article QR Code