4/5/2025, 11:55:36 PM 星期六
Power external transmission mechanism in return stroke of the jet type fluid hammer based on LSDYNA
CSTR:
Author:
Affiliation:

College of Construction Engineering, Jilin University,College of Construction Engineering, Jilin University,College of Construction Engineering, Jilin University,College of Construction Engineering, Jilin University

Clc Number:

P634.4

  • Article
  • | |
  • Metrics
  • |
  • Reference [15]
  • |
  • Related
  • | | |
  • Comments
    Abstract:

    A structure for changing the propagation ways of the impact stress wave in the jet type fluid hammer is designed, and analysis shows that the attenuation degree of the stress wave changes with different propagation ways. The simulation on the hammer returnstroke is analyzed based on LSDYNA. The stress change of the fluid element is studied when the hammer impact is propagated in two different ways in the return stroke of the jet type fluid hammer. The results show that the power external transmission mechanism can greatly reduce the impact stress acting on the fluidic element by avoiding the rigid collision on the upper part of the cylinder. Moreover, the geometric parameters of the external transmission mechanism also have some influence on the stress attenuation.

    Reference
    [1] Jian,Z.J.,Sang,L.,Hu,G.Q.,Zhang,W.H.: The Drilling experiment in geothermal well of DGSC-203 type Hydro-Efflux hammer, Geology and Prospecting,vol.38,no.5,pp.92-93,2002.
    [2] 龚书浩,谷秀萍,赵顺波,何剑.锤击打入式预制桩断桩成因及处理研究[J].中国港湾建设,2002,5:31-35.
    [3] 刘合,王秀喜.套损井整形冲击应力波的传播机理研究[J].工程力学,2005(04):206-210.
    [4] 李亚林,刘咏,周永贵,李昆,赵中伟.梯度结构硬质合金的疲劳断裂[J].粉末冶金材料科学与工程,2011,16(05):747-754.
    [5] 杨冬冬,李国琳,纪天坤,孙强,彭枧明.基于LS-DYNA的射流式液动锤活塞回程缓冲结构的研究[J].探矿工程(岩土钻掘工程),2016,43(05):37-40.
    [6] 吴东宇.高能射流式液动锤冲击系统理论研究及关键结构优化分析[D].吉林大学,2017.
    [7] 尚嘉兰,沈乐天,赵坚.粗粒花岗闪长岩中应力波的传播衰减规律[J].岩石力学与工程学报,2001(02):212-215.
    [8] 黄中伟,杨磊.应力冲击波在结构节点的反射和透射[J].深圳大学学报(理工版),2007(01):9-12.
    [9] 李娜娜,李建春,李海波,刘婷婷,柴少波.节理接触面对应力波传播影响的SHPB试验研究[J].岩石力学与工程学报,2015,34(10):1994-2000.
    [10] 张鹏,周德源.基于ANSYS/LS-DYNA的护栏冲击模拟分析精度研究[J].振动与冲击,2008(04):147-152+163+176-177.
    [11] 吴冬宇,彭枧明,殷琨,张鑫鑫.基于Ls-dyna的射流式冲击器冲锤结构[J].东北大学学报(自然科学版),2016,37(10):1441-1445.
    [12] 张峰峰,殷福新.基于LS-DYNA刚性钢框架受撞击整体性能的有限元分析[J].中国新技术新产品,2009(18):21.
    [13] 祝昭丹. 啄木鸟头颅结构抗冲击力学机理[D].大连理工大学,2015.
    [14] 纪天坤,孙强,杨冬冬,彭枧明.新型射流式元件结构设计与试验研究[J].探矿工程(岩土钻掘工程),2016,43(06):52-55.
    [15] 杜小军,蒋荣庆.大直径潜孔锤冲击能量传递模拟试验研究[J].探矿工程(岩土钻掘工程),1996(06):4-7.
    Related
    Cited by
    Comments
    Comments
    分享到微博
    Submit
Get Citation
Share
Article Metrics
  • Abstract:1175
  • PDF: 906
  • HTML: 246
  • Cited by: 0
History
  • Received:June 23,2018
  • Revised:December 17,2018
  • Adopted:December 27,2018
  • Online: January 31,2019
Article QR Code