4/6/2025, 12:34:27 PM 星期日
Design of Reduction Transmission Device for Polar Deep Ice Drilling
CSTR:
Author:
Affiliation:

College of Construction Engineering, Jilin University,College of Construction Engineering, Jilin University

Clc Number:

P634.3 1;TH132

  • Article
  • | |
  • Metrics
  • |
  • Reference [15]
  • |
  • Related [8]
  • | | |
  • Comments
    Abstract:

    In the previous reduction transmission device of polar deep ice drilling, planetary gear reduction transmission device is prone to appear fatigue failure, which results in short service life of reduction transmission device. In view of this problem, the improvement design is made on the reduction transmission device of armored cable electro-mechanical drilling tool, the device structure and size are determined; the meshing force of the device is analyzed and the strength estimation is carried out. A 3dimensional solid model of the reduction transmission device is built by using Inventor software and ANSYS Workbench software is used for the static analysis on the device structure. The results indicate that this oscillating tooth reduction transmission device can meet the design requirements and provide a basis for the optimization of reduction transmission device design for polar deep ice drilling.

    Reference
    【1】王莉莉,徐会文,赵大军,韩丽丽,宋佳宇,Pavel Talalay. 南极冰层取心钻探钻井液对雪层影响的模拟研究[J]. 探矿工程(岩土钻掘工程),2013,40(12):1-4.
    【2】韩丽丽. 南极冰钻超低温钻井液技术研究[D].吉林长春:吉林大学,2013:9-12.
    【3】范晓鹏. 极地冰下基岩取心钻具反扭装置与钻头钻压平衡关系研究[D].吉林长春:吉林大学,2014:1-5.
    【4】宋佳宇,徐会文,韩丽丽,刘宁,Pavel Talalay. 南极冰层钻进铠装钻具升降运动特性分析与试验[J]. 探矿工程(岩土钻掘工程),2014,41(07):12-15.
    【5】曲继方.活齿传动理论[M].北京: 机械工业出版社,1993:1-15.
    【6】徐秀花. 双级滚柱活齿减速器的研究[D].山东济南:山东大学,2005:1-4.
    【7】曲继方. 活齿齿轮副的参数分析及齿形综合[J]. 齿轮,1989,13(01):38-41.
    【8】徐秀花,孙家林. 活齿中心轮齿廓曲线计算机辅助设计[J]. 机械传动,2004,28(06):43-44+2.
    【9】林菁,王启义. 圆柱活齿传动齿廓及其结构特性研究[J]. 机械传动,1999,23(02):22-25.
    【10】成大先.机械设计手册第五版第3卷[M].北京:化学工业出版社,2008:14-571-14-581.
    【11】李瑰贤,孙瑜,胡长胜. 圆柱正弦活齿传动接触强度的模糊可靠性研究[J]. 机械工程师,2004,(06):29-31.
    【12】Indra Djodikusumo,I. Nengah Diasta,Fachri Koeshardono. The Modeling of a Propeller Turbine Runner in 3D Solid Using 3D Equation Curve in Autodesk Inventor 2015[J]. Applied Mechanics and Materials,2016,4225(842):147-163.
    【13】Yan Fang Wang,Qing Ping Zhang. Study on Virtual Prototype Modeling of Swing Movable Teeth Transmission[J]. Applied Mechanics and Materials,2014,3343(607):325-328.
    【14】Jun Fei Wu,Xin Zhou,Hao Zhang. The FEA of New Type Roller Movable Teeth Reducer[J]. Applied Mechanics and Materials,2012,1620(152):603-608.
    【15】CAE应用联盟组编.ANSYS Workbench 16.0理论解析与工程应用实例[M].北京:机械工业出版社,2016.
    Cited by
    Comments
    Comments
    分享到微博
    Submit
Get Citation
Share
Article Metrics
  • Abstract:1131
  • PDF: 1127
  • HTML: 258
  • Cited by: 0
History
  • Received:September 20,2017
  • Revised:December 06,2017
  • Adopted:December 07,2017
  • Online: March 14,2018
Article QR Code