4/5/2025, 10:51:15 PM 星期六
Analysis on Anti-collapse Ability of Oil Casing under External Non-uniform Load and Internal Pressure
CSTR:
Author:
Affiliation:

Guangxi Colleges and Universities Key Laboratory of Beibu Gulf Oil and Natural Gas Resource Effective Utilization, College of Petroleum and Chemical Engineering, Qinzhou University,Yibin China-Resources Gas Co., Ltd.,Guangxi Colleges and Universities Key Laboratory of Beibu Gulf Oil and Natural Gas Resource Effective Utilization, College of Petroleum and Chemical Engineering, Qinzhou University,Guangxi Colleges and Universities Key Laboratory of Beibu Gulf Oil and Natural Gas Resource Effective Utilization, College of Petroleum and Chemical Engineering, Qinzhou University,Guangxi Colleges and Universities Key Laboratory of Beibu Gulf Oil and Natural Gas Resource Effective Utilization, College of Petroleum and Chemical Engineering, Qinzhou University

Clc Number:

TE925;TH123.3

  • Article
  • | |
  • Metrics
  • |
  • Reference [12]
  • |
  • Related
  • |
  • Cited by
  • | |
  • Comments
    Abstract:

    Oil casing is usually under the complicated internal and external stress environment. The study and analysis on the influence of these factors on casing collapse resistance ability are very important, which can provide theoretical basis for casing strength design. Based on the stress characteristics of casing under external non-uniform load and internal pressure and the theory of material mechanics, a calculation model of hoop stress of ideal casing at unit length is established, the distribution regularity of hoop stress of internal and external casing surfaces is revealed. The calculation shows that the yield failure point is at the internal surface in circumferential direction of 90 angle with maximum horizontal crustal stress. A new formula of external collapse resistance ability under non-uniform external collapse load and internal pressure during casing buckling is derived from the failure point by Von Mises yield criterion. Calculation examples show that non-uniformity coefficient of external load has the greatest impact on external collapse resistance ability among all the influence factors on collapse resistance ability of casing. The larger the non-uniformity coefficient of external load is, the faster the collapse resistance ability of casing declines; under less external load non-uniformity, the external load bearing capacity of casing can be improved by increasing the internal pressure and decreasing casing diameter-thickness ratio.

    Reference
    [1] 申昭熙,马耀荣,解学东,等.外压作用下套管抗挤强度研究[J].石油矿场机械,2007,36(11):5-9.Shen Zhaoxi,Feng Yaorong,Xie Xuedong,et al.Casing collapse analysis under external pressure[J].Oil Field Equipment,2007,36(11):5-9.
    [2] 殷有泉,李志明,张广清,等.蠕变地层套管载荷分析研究[J].岩石力学与工程学报, 2004, 23(14):2381-2384.YinSYouquan,Li Zhiming,ZhangSGuangqing,et al.Study on casing loads in creep formation[J].Chinese Journal of Rock Mechanic sand Engineering,2004,23(14):2381-2384.
    [3] 王晓页,王奎升,王风祥,等.非均匀地应力下套管变形和整形复位分析[J].石油矿场机械,2009,38(5):9-14.Wang Xiaoye,Wang Kuisheng,Wang Fengxiang,et al. Mechanics analysis of casing deformation under non –uniform in-situ stress and its repair[J].Oil Field Equipment,2009,38(5):9-14.
    [4] 张志全,伍家忠,罗跃.港西油田套管变形原因分析及对策[J].江汉石油学院学报,2002,24(4):83-84.Zhang Zhiquan,Wu Jiazhong,Luo Yue.Analysis and Countermeasures of Casing Deformation Causes in Gangxi Oil field[J]. Journal of Jianghan Petroleum Institute,2002,24(4):83-84.
    [5] 郑俊德,张艳秋,王文军,等.非均匀载荷下套管强度的计算[J].石油学报,1998,19(1):119-123..Zheng Junde,Zhang Yanqiu,Wang Wenjun,et al.Calculation of casing strength under nonuniform loading[J].Acta Petrolei Sinica,1998, 19( 1):119-123.
    [6] 张建华,王悦.非均匀地应力下套管的抗外挤强度理论解[J].内蒙古石油化工,2007(6),123-125.Zhang Jianhua,Wang Yue.Theoretical solution of casing loading in nor-uniform ground stress field[J].Inner Mongolia Petrochemical Industry,2007(6),123-125.
    [7] 曾德智,林元华,李双贵,等.非均匀载荷下厚壁套管抗挤强度分析[J].天然气工业,2007,27(2):60-62.Zeng Dezhi,Lin Yuan hua,Li Shuanggui,et al.Collapse strength analysis for thick-wall casing under nonuniform loading[J].Natural Gas Industry,2007,27(2):60-62.
    [8] 闫相祯,杨秀娟,冯耀荣,等.蠕变地层套管外载计算的位移反分析法[J].中国石油大学学报:自然科学版,2006,30(1):102-106.Yan Xiangzhen,Yang Xiujuan,Feng Yaorong,et al.Displacement inverse analysis of casing external loads of creep stratum[J]. Journal of China University of Petroleum:Nature Science Edition,2006,30(1): 102-106.
    [9] 周雄,何世明,郭元恒,等. 非均匀载荷套管抗外挤能力分析[J].机械设计与制造,2014,10:213-216Zhou Xiong,He Shi-ming,Guo Yuan-heng,et al.Collapse resistance analysis of casing non-uniform load[J].Machinery Design Manufacture,2014,10:213-216
    [10] 蔡正敏,张树佳,陈香凯,等.非均布载荷下石油套管抗挤强度问题研究[J].石油矿场机械,2009,38(12):31-34.Cai Zhengmin,Zhang Shujia,Chen Xiangkai,et al.Research on collapse strength of oil casing under non-uniform loads[J].Oil Field Equipment, 2009,38(12):31-34.
    [11] 周雄,何世明,郭元恒,等.非均匀椭圆载荷下套管抗外挤能力分析[J].探矿工程(岩土钻掘工程),2014,41(7):16-19Zhou Xiong,He Shi-ming,Guo Yuan-heng,et al.Analysis on collapse resistance of casing under non-uniform elliptic load[J]. Exploration Engineering(Rock Soil Drilling and Tunneling),2014,41(7):16-19
    [12] 韩建增,张先普.非均匀载荷作用下套管抗挤强度初探[J].钻采工艺,2001, 24(3):48-50.Han Jianzeng, Zhang Xianpu.Discussion of casing collapsing strength under non-uniform loading[J].Drilling Production Technology,2001,24(3):48-50.
    Related
    Cited by
Get Citation
Share
Article Metrics
  • Abstract:1121
  • PDF: 1133
  • HTML: 226
  • Cited by: 0
History
  • Received:February 02,2017
  • Revised:February 02,2017
  • Adopted:May 11,2017
  • Online: September 18,2017
Article QR Code