4/6/2025, 1:03:07 AM 星期日
Discussion about Calculation Methods of Rock Fracturing by Rotary Drill
CSTR:
Author:
Affiliation:

Xuzhou Xugong Foundation Construction Machinery Co. Ltd.,Xuzhou Xugong Foundation Construction Machinery Co. Ltd.,Xuzhou Xugong Foundation Construction Machinery Co. Ltd.,Xuzhou Xugong Foundation Construction Machinery Co. Ltd.,Xuzhou Xugong Foundation Construction Machinery Co. Ltd.

Clc Number:

P634

  • Article
  • | |
  • Metrics
  • |
  • Reference [12]
  • |
  • Related [3]
  • | | |
  • Comments
    Abstract:

    Combining with basic phenomenon in rock fracturing by external load, the analysis is made on the process of crushing rock by rotary drilling to get the helical breaking form. Based on the conditions of pressing into the rocks and selecting a single cutting pick as calculation model, the theoretical formula of axial pressure is obtained; then with the reference of Coulomb-Navier internal friction theory, the theoretical calculation formula of cutting force is obtained. According to different types of drilling tool, the calculation formula of single cutting teeth is extended, the formulas for calculating the pressure and torque parameters of rotary drilling rig are obtained. The influence factors under specific conditions in the axial force and cutting force calculation formulas are simplified, the theoretical relationship between drilling penetration rate and cutting force in rotary drilling process is obtained. Finally, by dynamic analysis software LS-DYNA, change curve of cutting force of single pick in different drilled depth is simulated, and the comparison is made on the simulated curve and the theoretical calculated curve under the same condition to get the theoretical calculation formula for cracking parameters of single pick, which can be reference for the design of rotary drilling rig.

    Reference
    [1] 徐小荷,余静.岩石破碎学[M].北京:煤炭工业出版社,1984.
    [2] 鄢泰宁,孙友宏,彭振斌,等.岩土钻掘工程学.[M].武汉:中国地质大学出版社,2001(8).
    [3] 李田军.PDC钻头破碎岩石的力学分析与机理研究[D].武汉:中国地质大学(武汉),2012.
    Li Tianjun. Mechanical analysis and Fragmentation Mechanism of PDC bits Drilling Rock[D].China University of Geosciences(Wuhan).2012
    [4] 张组培,刘宝昌.碎岩工程学[M].北京:地质出版社,2004.
    [5]巫绪涛,李耀,李和平.混凝土HJC本构模型参数的研究[J].应用力学学报,2010,27(2):340-344.
    Wu Xutao, Li Yao,Li Hepeng.Research on the material constants of the HJC dynamic constitutive model for concrete[J].Chinese Joural of Applied Mechanics, 2010,27(2):340-344.
    [6] 薛静.盘形滚刀切削力影响因素及滚刀刃形优化设计研究[D].中南大学,2010.05.
    [7]赵伏军,谢世勇,潘建忠,等.动静组合载荷作用下岩石破碎数值模拟及试验研究[J].2011,33(8):1290-1295.
    ZHAO Fujun, XIE Shiyong, PAN Jianzhong, et al.Numerical simulation and experimental investigation on rock fragmentation undercombined dynamic and static loading[J].Chinese Journal of Geotechnical Engineering.2011,33(8):1290-1295.
    [8] 黎中银,夏柏如,吴方晓.旋挖钻机高效入岩机理及其工程应用[J].中国公路学报,2009,22(3):121-126.
    Li Zhongyin, Xia Bairu ,Wu Fangxiao.Mechanism of Efficient Rock Cracking and Its Engineering Application of Rotary Drilling Rig[J].China Journal of Highway and Transport.2009,22(3):121-126.
    Cited by
    Comments
    Comments
    分享到微博
    Submit
Get Citation
Share
Article Metrics
  • Abstract:1177
  • PDF: 1267
  • HTML: 256
  • Cited by: 0
History
  • Received:July 19,2016
  • Revised:December 13,2016
  • Adopted:April 01,2017
  • Online: July 20,2017
Article QR Code