4/4/2025, 11:21:22 PM 星期五
Application of Hydraulic Rotary Tool in Well of Xushen1-Ping 3
CSTR:
Author:
Affiliation:

Drilling Engineering Technology Research Institute of Daqing Drilling and Exploration Engineering Corporation

Clc Number:

P634;TE242

  • Article
  • | |
  • Metrics
  • |
  • Reference [6]
  • |
  • Related [20]
  • |
  • Cited by [0]
  • | |
  • Comments
    Abstract:

    In order to improve the drilling speed of the horizontal well to reduce drilling investment in Qingshen gas field, a rotary percussion drilling test was carried out in the 3rd opening interval of Xushen1-Ping3. By the analysis on the strength of the BHA and according to the characteristics of hydraulic rotary tools with different dimensions, the acceleration technology scheme was formulated, the drilling parameters were optimized and the field tests were made. It was proved that there was obvious improvement in deep vertical section by hydraulic drilling. First of all, from the analysis on testing whether the new BHA strength meets the drilling requirements to prevent fatigue failure of drill caused by stress concentration. The drilling parameters were optimized by the pump pressure-displacement back-stepping formula of hydraulic rotary tools under the condition of the fact that the pump pressure of ZJ50D rig is generally no more than 25MPa in Daqing. Based on the parameter optimization result, the specific construction measures were formulated to ensure the successful field test of φ279mm hydraulic rotary tool.

    Reference
    [1] Whiteley M C,England W P. Air drilling operations improvedby percussion-bit / hammer-tool tandem [R] .SPE 13429,1986.
    [2] Pratt C A. Modifications to and experience with percussion air drilling [R] . SPE/lADC 16166,1987.
    [3] Melamed Y,Kiselev A,Gelfgat M,et al. Hydraulic hammer drilling technology: Developments and capabilities[J] . Journal of Energy Resources Technology,2000,122 ( 1) : 1 - 8.
    [4]付加胜,李根生 田守嶒 史怀忠 液动冲击钻井技术发展与应用现状[J] 石油机械,2014,42(6)
    [5]王雷,郭志勤,张景柱,谈献英 旋冲钻井技术在石油钻井中的应用 钻采工艺,1006一768X( 2005) 01 一0008 一03
    [6]汪海阁,王灵碧,纪国栋,等. 国内外钻完井技术新进展[J]. 石油钻采工艺,2013,35(5):1-12.
    Cited by
    [1]WANG Jianyan,HAN Fubin,CHEN Linlin,YANG Yongxiang,YUAN Houguo,LI Bing.古城601井井身结构优化设计[J].Exploration Engineering(Drilling & Tunneling),2020,47(6):30-36.
    Comments
    Comments
    分享到微博
    Submit
Get Citation
Share
Article Metrics
  • Abstract:1065
  • PDF: 1153
  • HTML: 209
  • Cited by: 0
History
  • Received:September 26,2014
  • Revised:January 26,2015
  • Adopted:March 10,2015
  • Online: May 12,2015
Article QR Code