4/6/2025, 5:20:13 AM 星期日
Design of Pipe Racking for 3500m Hydraulic Core Drill Rig and the Dynamic Simulation Analysis
CSTR:
Affiliation:

The Institute of Exploration Techniques, CAGS,The Institute of Exploration Techniques, CAGS,The Institute of Exploration Techniques, CAGS,The Institute of Exploration Techniques, CAGS,The Institute of Exploration Techniques, CAGS,The Institute of Exploration Techniques, CAGS

Fund Project:

随着我国探矿深度不断增加,钻探设备的尺寸不断加大,操作人员的劳动强度也在增加。基于此,3500 m液压岩心钻机需要适配一套移摆管装置,以实现快速、安全地运移钻杆,降低工人的劳动强度。对移摆管机构的设计进行了简单介绍,并利用ADAMS动力学仿真软件对移摆管机构进行运动仿真,找出设计的不足之处,给出优化建议。

  • Article
  • | |
  • Metrics
  • |
  • Reference [15]
  • |
  • Related [20]
  • |
  • Cited by [0]
  • | |
  • Comments
    Abstract:

    With the increasing depth of exploration,the size of drilling equipment becomes larger and larger, and the labor intensity of operators also increases. Based on this case, the 3500 hydraulic drilling rig requires a shift pendulum tube device to reduce labor intensity as well as to transport drill fast and safely. In this paper, the racking pipe device has been designed with a determination of the parameters and the mode of the moving parts to guarantee the racking pipe device move smoothly and operate safely and reliably. Meanwhile, ADAMS dynamics simulation software has been used to conduct motion simulation for the device to identify deficiencies in the design, and to give optimization recommendations.

    Reference
    [1]杨帆.ZJ50D型陆地钻机钻杆自动排放系统的方案设计研究:[D].兰州:兰州理工大学,2012.
    [2]刘文庆.钻井平台钻杆自动排放系统研究:[D].青岛:中国石油大学(华东),2008.
    [3]王宇.多轴机械手控制系统的研究与开发:[D].杭州:浙江大学,2012.
    [4]Besijn, H.: Pipe Handling System[R].The Hague. AIME meeting,1974.
    [5] 刘平全,崔学政,董磊.钻井平台的钻杆排放方式及其自动化操作系统[J],中国海洋平台,2010,01:51-56.
    [6]姜鸣,曹言悌,周声强.陆地钻机钻杆自动排放系统的设计方案[J].石油机械,2008,36(8):95-98.
    [7]郑立臣,童征,高向前等.二层台管柱排放系统及其工作方法[P]:中国,201110068266.6.2011-09-07.
    [8]李静.钻机移摆管机构设计及结构分析[D].北京:中国地质科学院,2011
    [9]沙永柏,朱吉良,李志东,林源.钻杆自动化操作系统的典型结构[J].机械制造,2011,562(6):60-62.
    [10]朱吉良.钻杆自动传送系统结构设计与仿真分析[D].长春:吉林大学,2012.
    [11]张飞宇.MPR-70A型全液压自动排管机动力学仿真分析[D].长春:吉林大学,2013.
    [12]杨虎伟,赵大军,于萍,隗延龙,李淑敏,孙梓航.全液压顶驱钻机背钳的设计及运动仿真分析[J].探矿工程(岩土钻掘工程),2014,41(2):56-60.
    [13]刘智,殷新胜,孙保山.全液压坑道钻机增力式夹持器的设计[J].探矿工程(岩土钻掘工程),2014,41(2):61-63.
    [14]于雪林,于萍,朱玉江.JDY-1500型全液压钻机卡盘的仿真分析及设计[J].探矿工程(岩土钻掘工程),2008,35(5):22-24.
    [15]黄晓林,奎中.基于ANSYS Workbench的GDZ-300L型钻机动力头托架优化设计[J].探矿工程(岩土钻掘工程),2013,40(7):93-96
    Comments
    Comments
    分享到微博
    Submit
Get Citation
Share
Article Metrics
  • Abstract:967
  • PDF: 980
  • HTML: 199
  • Cited by: 0
History
  • Received:March 28,2014
  • Revised:March 28,2014
  • Adopted:April 08,2014
  • Online: April 28,2014
Article QR Code