钻井局域网实时监控设备研发

Research and development of real-time monitoring equipmentfor drilling local area network

摘要:

为实现钻井指挥部对各钻井站点钻采工艺的远程监控，在前期钻井工艺参数自动实时监测的单机研发基础上,本文应用TIA portal软件进行主站从站组网监控研究，实验设备用Siemens1200PLC做主控机，用Siemens200PLC做从站控制机监控钻采现场工艺参数，通过主控机与各从站点组态，实现主控机对从站主从控制。装机后在钻采现场进行了无线网传输实验，实验结果表明:应用互联网通信技术解决无线网断点续传问题，能够实现了钻采实时监控数据短距离传输。

Abstract:

In order to realize remote monitoring of the drilling process at each drilling station by the drilling headquarters, on the basis of the single station for automatic real-time drilling monitoring developed in the early stage, TIA portal software was applied to develope the master-slave station for drilling monitoring with Siemens1200PLC used as the master control equipment, and Siemens200PLC as the slave control equipment to monitor the drilling parameters at each drilling station. Master-slave controlling is realized through the configuration of the master control equipment and slave control equipment at each station. Internet was used to test transmission after the master-slave station was set up, and the results showed that internet can provide continuous transmission from breakpoint and short-distance transmission of real-time monitoring data on drilling.