4/5/2025, 3:36:24 PM 星期六
基于地应力的套管强度优化设计方法
CSTR:
作者:
作者单位:

中石油渤海钻探工程技术研究院,中国石油大学〈华东〉石油工程学院,中石化胜利油田地质研究所,中石化胜利油田地质研究所

中图分类号:

TE256

基金项目:

中石油渤海钻探工程有限公司科技项目“钻井提速工具优化升级与现场试验”(编号:2016ZD17Y-1)


Design Method of Casing Strength Optimization Based on In-situ Stress
Author:
Affiliation:

Bohai Drilling Engineering Technology Research Institute, CNPC,China University of Petroleum,Shengli Oilfield Geological Research Institute, SINOPEC,Shengli Oilfield Geological Research Institute, SINOPEC

  • 摘要
  • | |
  • 访问统计
  • |
  • 参考文献 [9]
  • |
  • 相似文献 [20]
  • | | |
  • 文章评论
    摘要:

    针对东辛复杂断块油藏泥岩夹层和断层附近套管损坏严重的问题,研究了套管在泥岩夹层和断层附近套损机理。研究表明,造成泥岩夹层和断层处套管损坏的主要原因是该层段的异常地应力。因此,在这2个层段,考虑异常地应力作用和承受非均匀地应力作用对套管强度的影响,提出了基于地应力的套管强度优化设计方法。

    Abstract:

    In view of the serious casing damage in the mudstone interlayer and near the fault of complex Dongxin fault block reservoir, the casing damage mechanism is studied. The studies demonstrate that the main causes of the casing damage in the mudstone interlayer and near the fault are the abnormal in-situ stress there. Therefore, considering casing damage caused by the abnormal stress and non-uniform stress in these 2 stratigraphic sections, the optimization design method of casing strength is put forward based on the in-situ stress.

    参考文献
    [1] 周延军,贾江鸿.预测套管损坏的新方法研究[J]. 探矿工程(岩土探矿工程),2005增刊:230-234.
    [2] 卓景军,张秀红.套管剪切破坏原因分析及防止技术[J].钻采工艺,2004,27(2):64-67.
    [3] 屈春艳.高压注水井套管缩径变形机理及防止技术[J].海洋石油,2006,27(1):97-99.
    [4] 刘杰.辽河油田油水井套管损坏机理及修复措施[J].探矿工程(岩土探矿工程),2005,2:50-52.
    [5] 刘绘新,严仁俊,王子平.非均布载荷下套管强度问题研究[J].钻采工艺,2001,24(4):47-48,63.
    [6] 卢云虎,陈勉等.山前浅部岩层断层附近套管损坏分析[J].石油钻采工艺,2011,33(3):109-112.
    [7] 王钟茂,卢万恒,胡江明.油田油水井套管损坏的机理及防治[M].北京:石油工业出版社,1994:127-129.
    [8] 刘东升,赵国等.油气井套损防止新技术[M].北京:石油工业出版社,2008:154-159.
    [9] 牛艳花,李春福,关舒伟,等.港西油田套管损坏的现状及建议[J]. 探矿工程(岩土探矿工程),2007,12:66-69.
    引证文献
    网友评论
    网友评论
    分享到微博
    发 布
引用本文

王建龙,张卫东,刘学松,等.基于地应力的套管强度优化设计方法[J].钻探工程,2018,45(1):31-33.
WANG Jian-long, ZHANG Wei-dong, LIU Xue-song, et al. Design Method of Casing Strength Optimization Based on In-situ Stress[J]. Drilling Engineering, 2018,45(1):31-33.

复制
分享
文章指标
  • 点击次数:1395
  • 下载次数: 1117
  • HTML阅读次数: 300
  • 引用次数: 0
历史
  • 收稿日期:2017-03-30
  • 最后修改日期:2017-11-02
  • 录用日期:2017-11-06
  • 在线发布日期: 2018-02-27
文章二维码